Home / House Painting / Gib Fixing & Plastering
Gib Fixing & Plastering in Auckland
Installation, stopping, repairs and Level 4–5 finishing — the dead-flat, paint-ready walls every flawless finish is built on. One team from bare framing to final coat.
Master PaintersMember Level 4 & 5 finishes $10m insured Prep + paint one team
Paint can't fix bad walls
The best paint job in Auckland can't save a bad surface.
The problem
Cracks, dents & damage
Settling, wear and past workmanship leave walls full of imperfections — and paint highlights every one.
The problem
Uneven, wavy surfaces
Bad plastering makes even premium paint look sloppy — especially in Auckland's raking afternoon light.
The problem
Two trades, one gap
When the plasterer and painter are different companies, the finish falls into the gap between them.
The fix: precision Gib fixing and plastering from the same team that paints the wall — so the surface is built for the finish going on it, and one crew owns the result end to end.
What we do
From patch repairs to full re-gibs
Homes, rentals, offices and commercial buildings across Auckland.
01
Gib installation & replacement
New boards measured, cut and fixed to framing with precision — walls and ceilings, solid and movement-free.
02
Gib stopping & jointing
Joints, corners and screw holes taped and coated in layered premium compound for a seamless surface.
03
Ceiling repairs
Cracks, water damage, sagging sections and plaster damage — fixed properly, not patched over.
04
Crack & hole repairs
From curtain-rod holes to cut-outs for electrical work — repaired, texture-matched and paint-ready.
05
Skim coating
Plaster skim coats that turn rough, tired walls into clean, level surfaces ready for paint.
06
Level 5 for premium finishes
The ultra-smooth base that gloss paints, sheen finishes and polished plaster demand.
The honest guide
Level 3, 4 or 5 — what finish does your wall need?
Plastering levels aren't upsells — they're matched to what's going on the wall afterwards.
| Level 3 | Level 4 | Level 5 | |
|---|---|---|---|
| Finish | Functional smooth | Standard smooth — the residential default | Ultra-smooth, skim-coated across the full surface |
| Right for | Garages, utility areas, textured coatings | Most painted walls and ceilings, wallpaper | Gloss & sheen paints, feature walls, decorative finishes |
| In raking light | Joints may show | Clean under normal conditions | Flawless — even under harsh side light |
Planning a polished plaster, sheen finish or dark feature wall? Level 5 isn't optional — sheen magnifies everything beneath it. We'll spec the right level for each room as part of your quote.
Straight answers
What Gib work actually costs
From $250Patching & minor repairs
$1k–$2.5kSingle-room re-gib + stopping
$6k+Full home re-gibbing
One teamPlasterers and painters in-house — no gaps between trades
Ranges include GST and vary with area, wall condition and finish level. Accurate fixed-price quotes after a quick site visit — start with the free instant estimator.
The one-team advantage
The plasterer and the painter answer to the same standard.
Most plasterers never see how their walls look painted. Most painters inherit surfaces they didn't prep. At Key Painting, the same in-house team does both — so the plastering is done knowing exactly what finish is going on top.
- One crew, one timeline — no coordinating separate trades
- Surfaces built for the finish: standard paint, gloss, sheen or decorative
- Durable, crack-resistant compound work that stays flawless
- Dust-minimising sanding techniques — clean site, clean air
- Trusted by developers, builders and brands like Dynasty Sport & Buro
How it works
Four steps to paint-ready walls
Assess & install
We assess the walls, then measure, cut and fix Gib boards to framing with precision — preventing movement and future cracking.
Free quote firstJoint & plaster
Joints, corners and screw holes taped and coated, with plaster built up in layers to a seamless, uniform surface.
Sand & smooth
Sanded to a perfect finish with dust-minimising techniques, then taken to Level 4 or 5 depending on what's going on top.
Inspect & hand over
Checked in raking light, every detail confirmed — then straight into painting with the same crew, if you want it.
Know your number first
Get a real ballpark before anyone visits.
Tell us the job — a patch, a room or the whole house — and get an indicative figure in about a minute, then a fixed price after a quick site visit.
Free instant estimate — Auckland's quickest estimator
Fixed-price quote with finish level specced room by room
Bundle plastering with painting for one seamless job
Price your Gib work
Repairs, stopping or full re-gib — get your indicative number in about a minute.
Try the free estimator → Or book a free site visit No obligation · No spam · Just a clear next stepGood to know
Gib & plastering questions, answered
What's the difference between gib fixing and gib stopping?
Gib fixing is installing the plasterboard sheets; gib stopping is the plastering and smoothing of the joins, screw holes and corners so the wall is ready for painting. We handle both — from small patch repairs to full home re-gibbing — with one in-house team.
How much does gib fixing and plastering cost in Auckland?
It depends on area size, wall condition and finish level. Indicatively: patching and minor repairs from $250, a single-room re-gib plus stopping $1,000–$2,500, and full home re-gibbing from $6,000+ (GST included). We give accurate fixed-price quotes after a quick site visit — start with the free instant estimator.
What's the difference between Level 4 and Level 5 plastering?
Level 4 is the standard smooth finish — right for most painted walls and wallpaper. Level 5 adds a full skim coat across the entire surface for an ultra-smooth result that stays flawless even in harsh raking light. Level 5 is essential under gloss and sheen paints, dark feature walls, and decorative finishes like polished plaster.
Do I need gib fixing before painting?
If your walls have cracks, dents, water damage or rough joins — yes. Paint won't cover a bad surface; it advertises it. We prep walls properly so the final finish is smooth, durable and professional, which is exactly why our paintwork lasts.
Can you fix holes, dents and damage in existing walls?
Routinely — small holes from curtain rods and wall mounts, cracks along joins, larger dents and accidental damage, and Gib cut out for electrical or plumbing work. We match the existing texture and leave the wall paint-ready.
Do your painters also do the plastering?
Yes — our team includes experienced plasterers and gib fixers, so everything is managed in-house: one team for prep and paint, one seamless timeline, and no back-and-forth between trades. The surface is built for the finish going on it.
Let's begin
Every flawless finish starts under the paint.
Homeowners, builders and developers across Auckland trust Key Painting for walls done properly from the framing out. Start with a free site visit — or get your number in 60 seconds.
